page 1 www.citrelay.com phone - 763.535.2339 fax - 763.535.2194 speci? cations and availability subject to change without notic e. dimensions shown in mm. dimensions are shown for reference purp oses only. rohs compliant j115f1 31.7 x 26.9 x 20.3 mm ? ul f class rated standard ? small size and light weight, low coil power consumption ? heavy contact load, strong shock and vibration resistance ? ul/cul, t v certi? ed contact data* coil voltage vdc coil resistance +/- 10% pick up voltage vdc (max) 75% of rated voltage release voltage vdc (min) 10% of rated voltage coil power w operate time ms release time ms rated max .6w .9w 5 6.5 42 28 3.75 .5 .60 .90 15 10 9 11.7 135 90 6.75 .9 12 15.6 240 160 9.00 1.2 24 31.2 960 640 18.00 2.4 48 62.4 3840 2560 36.00 4.8 110 140.3 20167 13445 82.50 11.0 coil voltage vac coil resistance +/- 10% pick up voltage vac (max) 75% of rated voltage release voltage vac (min) 30% of rated voltage coil power va operate time ms release time ms rated max 12 15.6 27 9.00 3.6 2va 15 10 24 31.2 120 18.00 7.2 110 143 2360 82.50 33.0 120 156 3040 90.00 36.0 220 286 13490 165.00 66.0 240 312 15320 180.00 72.0 277 360 20210 207.00 83.1 coil data dc parameters* coil data ac parameters* ul contact rating n.o. 5a @ 280vac ballast 5a @ 280vac general purpose 20a @ 240vac resistive, 250k cycles, 40c 25a @ 277vac, resistive 100k cycles, 40c 40a @ 240vac resistive, 40c 30a @ 277vac general purpose 2hp @ 250vac, 40c ; 1hp @ 125vac , 50k cycles, 40c n.c. 5a @ 280vac ballast 5a @ 280vac general purpose 30a @ 240vac resistive, 40c 30a @ 30vdc, 40c 20a @ 277vac general purpose 1-1/2hp @ 2 50vac; 1/4hp @ 125vac 50k cycles, 40c features contact arrangement 1a = spst n.o. 1b = spst n.c. 1c = spdt contact resistance < 30 milliohms initial contact material agsno 2 agsno 2 in 2 o 3 maximum switching power 9600va, 1120 w maximum switching voltage 277vac, 110vdc maximum switching current 40a tv contact rating n.o. 40a @ 240vac; 14vdc 30a @ 277vac n.c. 30a @ 240vac; 14vdc 20a @ 277vac r f eature s f f e197852
www.citrelay.com phone - 763.535.2339 fax - 763.535.2194 speci? cations and availability subject to change without notic e. dimensions shown in mm. dimensions are shown for reference purp oses only. j115f1 page 2 ordering information general data* 1. series j115f1 1c 12vdc s 6 .6 j115f1 2. contact arrangement 1a = spst n.o. 1b = spst n.c. 1c = spdt 3. coil voltage 5vdc 9vdc 12vdc 24vdc 48vdc 110vdc 12vac 24vac 110vac 120vac 220vac 240vac 277vac 4. sealing options s = sealed (standard) n = no cover 5. option none = pin 6 included **not available with ac coils 6 = pin 6 removed h = pin 6 removed & high dielectric strength resistant **not available with ac coils 6. coil power .9 = .9w .6 = .6w blank = 2va (ac coil) 7. contact material blank = agsno 2 u = agsno 2 in 2 o 3 electrical life @ rated load 100k cycles, average mechanical life 10m cycles, average insulation resistance 1000m min. @ 500vdc initial dielectric strength coil to contact 4000v rms min. @ s ea level initial (h = high dielectric strength option) 2500v rms min. @ sea level initial (with pin 6 removed) contact to contact 1500v rms m in. @ sea level initial shock resistance 200m/s 2 for 11 ms vibration resistance 1.50mm double amplitude 10~40hz terminal (copper alloy) strength 10n operating temperature -55 o c to +125 o c storage temperature -55 o c to +155 o c solderability 260 o c for 5 s weight 30g, 27g (no cover) * values can change due to the switching frequency, desired reliability levels, environmental conditions and in-rush load levels. it is recommended to test actual load conditions for the application. it is the user?s responsibility to determine the performance suitability for their speci c application. the use of any coil voltage less than the rated coil voltage may compromise the operation of the relay.
www.citrelay.com phone - 763.535.2339 fax - 763.535.2194 speci? cations and availability subject to change without notic e. dimensions shown in mm. dimensions are shown for reference purp oses only. j115f1 page 3 dimensions units = mm bottom views schematics & pc layouts s = sealed n = no cover 1a 1b 1c with pin 6 without pin 6
|
